TOOL AUCTION

May 2, 2009, 9 AM Start

Humboldt Fairgrounds Building (Events Center)

311 6th Ave. North, Humboldt, Iowa 50548

 

(The Tool Collection of Bob Alriches of Pocahontas, Iowa and select consignments from other collections in IA, IL, MO, & OK)

 

1.  Stanley #7 jointer plane, Sargent #409 bench plane & Stanley #220 block plane. Photo

2.  Four iron bench planes: Rockford R5 jack with Lakeside blade, VG; CORSAIR 9-inch smoother; Parplus-type smoother & early Stanley #4, VG. Photo

3.  Bedrock #606C fore plane light rust, will clean to very good overall. Photo

4.  Three STANLEY bench planes: #5 jack with light rust, will clean to very good; Stanley #4 ½-jumbo smoother with replaced wood, very good; & Stanley #3 with repaired tote, very good. Photo

5.  Three Stanley bench planes: #7C, SW cutter, tote missing spur, & chipped lever cap, VG; #4 1/2C Type 11, small chip from handle spur, good V-logo blade, VG; & #4C Type 11, with good V-logo blade, VG. Photo

6.  Pair of drawknives: Unknown make with slightly curved 11-inch blade and another unknown make with 8-inch blade, fine overall. Photo

7.  Greenlee folding-handle drawknife, complete and very good. Photo

8.  Like new C.E. Jennings 8-inch folding handle drawknife Pat. Feb. 20, 1906. Photo

9.  Like new Oak Leaf 8-inch drawknife. Photo

10. Lot of 4 drawknives that will all make good users. Photo

11. Five wooden molding planes: moving fillester with screw-operated depth stop, intact nicker, needs new bottom fence; unknown rabbet, rough; unknown nosing plane, rough; OWASCO ¾-in. round; & SEARS & ROEBUCK 7/8-in. reverse ogee complex profile, VG. Photo

12. Unknown No. 104 screw-arm plow plane, few thread chips otherwise very good usable condition. Photo 1 & Photo 2

13. Unknown #101 beech screw-arm plow plane, very good. Photo 1 & Photo 2

14. Nice Yankee-style plow plane, faint owner’s mark, very good overall condition. Photo 1 & Photo 2

15. Two bit braces: Stanley Fray X3, 6-inch very nice & Simmons that has been welded on near the chuck, good for parts. Photo

16. Wooden brace with one bit, very good. Photo

17. Wm. Marples & Sons plated Sheffield brace, very good. Photo

18. Medium sized spoke or dowel pointer & patented hollow auger. Photo

19. C.S. Stearn hollow auger & medium sized dowel pointer, both VG. Photo

20. Patented hollow auger & medium sized dowel pointer. Photo

21. Wooden box assorted square-shanked auger bits by various makers. Photo 1 & Photo 2

22.  Four hand drills: Goodell-Pratt 2-speed, VG; Yankee #1445 2-speed, needs cleaning; DEFIANCE? with storage handle, one bit, good; and a smaller Defiance type with handle full of bits, VG. Photo

23. Four iron bench planes: Stanley #8, rusty and needs TLC; Keen Kutter (Ohio Tool) KK6C, VG; early Stanley 5 1/2C, missing front knob; tote is an improper replacement, chipped side rail, throat, good for a user or parts; Stanley 4 1/2C twisted lateral, can be restored to usable condition. Photo

24. Three Stanley bench planes: #5 ½ jumbo jack, throat brazed, a good user; #5 ¼ junior jack with fine rosewood tote and knob, fine overall; and #3 with fine stained hardwood tote, rosewood knob, fine overall. Photo 1 & Photo 2

25. Lot of gimlets by assorted makers, all in very good overall condition. Photo 1 & Photo 2

26. Wooden box fitted for bitstock tools; inside are six graduated spoon bits, all VG; four center bits with square shafts, two are twisted; a tapered reamer; and several misc. bits. There are empty spots where four additional center bits once lived as well as spaces for a screwdriver? bit and a countersink. Photo 1 & Photo 2

27. . Pair unhandled screw-arm plow planes: Ohio Tool #96 has had the wedge driven deep into the mortise, if it can be removed, this one will be a great user: the other is marked “95” on the toe, VG. Photo

28. Five wooden molding planes: Three rounds, one is missing the blade; a very nice right handed side rabbet by P.V. HILL, GRAYS INN RD.; and a handled rabbet? Photo

29. Two side rabbet planes: DR BARTON 1-inch, VG; and WALTER F. JONES BURLINGTON, IA 5/8-inch side rabbet, VG. Photo 1 & Photo 2

30. Two wooden screw-arm plank planes: one by Ohio Tool and one by Wolf & Lane Pittsburgh, both can be restored to usable condition. Photo

31. Auburn Tool Co. 5/8-in. side rabbet, VG; & Sandusky “Special” weatherstripping plane, VG; plus two wooden smoothers by Howland & Scioto.

32. Two handled screw-arm plow planes: one marked S.H. BROWN on toe, VG; and the other is an Ohio Tool #96 ½ that needs one arm replaced, good; plus a screw-arm dado by Auburn Tool, basket case. Photo

33. Set of 8 plow plane blades or irons in an owner-made wooden box, very nice. Photo

34. Pair handled screw-arm plow planes: Auburn Tool Co. chipped handle, otherwise complete and VG; the other looks almost identical but is unmarked, it’s missing wedge & blade, but is otherwise OK. Photo

35. Pair Stanley bench planes: S5 steel jack plane, fine rosewood tote and tall knob, SW cutter, VG; & #3C wooden smooth plane, good rosewood tote and short knob, very good overall. Photo 1 & Photo 2

36. Pair of Stanley bench planes: S4 steel smoother, good tall knob, tote glued at base, VG; & Stanley HANDYMAN #H104 fine overall. Photo 1 & Photo 2

37. Stanley BEDROCK 603C smoother, VG rosewood tote and tall knob, VG. Photo 1 & Photo 2

38. Lot: four braces, one hand drill and assorted auger bits in a nice canvas pouch, the braces range from good to very good. Photo

39. Lot of four fixer upper drills: Millers Falls? 2-speed breast drill with 2-jaw chuck, will clean to VG; Millers Falls? hand drill with pinion gear, bit storage in handle, just needs a crank arm; Early Millers Falls with rosewood or coco handle and nickel plated trim, will clean to VG; & DUNLAP A-I with bit storage handle, can be restored to usable condition. Photo

40. Lot of four iron block planes inc. Stanley #75 bullnose rabbet, a 4-inch with squirrel-tail handle, etc. Photo

41. Four iron bench planes: Stanley #5C, VG; Unknown jack; WARDS MASTER 8-inch smoother, VG; and Stanley #3 smoother with light rust, will clean to VG. Photo

42. Two mini planes: a MARX toy plane & a JORDAN GERMANY #101 mini block plane, VG. Photo

43. Stanley #90 cabinetmaker’s rabbet plane VG; Stanley #75 bullnose rabbet plane, VG: & Stanley #103 block plane, FINE. Photo

44. Five spoke shaves: one early Stanley iron shave & four wooden shaves inc. one by Robt. Sorby. Photo

45. Three wooden spokeshaves: #90 Keen Kutter marked BD of ED (board of education) and another is by John Booth. All VG. Photo

46. Two iron spokeshaves: Stanley #63, VG & Unknown with flat and convex blades, VG. Photo

47. Three breast drills: ENDERS; JOHN S. FRAY & CO.; and DEFIANCE by STANLEY #1247 ½, all in very good usable condition. Photo

48. Three ratchet nice braces: Stanley #923-10-in. with nice coco or rosewood handles: VICTOR #945-12-in.; and Stanley 921-10-inch. Photo

49. Unusual FRANKLIN PATENT shoe sole trimming plane, show on PTAMPIA VOL 1, p.144, complete with the fence on the right side, very good overall.

50. RARE Stanley 10 ¼ tilting handle carrige maker’s rabbet plane, TYPE 1, complete & fine. Photo 1 & Photo 2

51. Stanley #112 cabinet scraper plane, with VG Stanley blade, VG. Photo

52. Stanley #113 Type 2 compass plane, complete and VG. Photo

53. Stanley #2 smooth plane, STANLEY lever cap, BofE (Board of Education) hard rubber tote has a few cracks, otherwise complete and very good overall. Photo 1 & Photo 2

54. Stanley #113 Type 3 compass plane, cutter nearly spent, 70%+ japanning, very good overall. Photo

55. Fulton Tool Co. #113 compass plane with fancy floral knob, proper Fulton cutter, complete and will clean to very good overall condition. Photo

56. Four iron block planes: Stanley #130 turned into a bullnose on one end; Stanley #140 skew-bladed missing side plate but in otherwise very good condition; Stanley Two-Tone, etc. Photo

57. Five iron block planes: two late Stanley #220; #130 turned into a bullnose; Stanley #110 & Stanley #103. Photo

58. Stanley #113 compass plane, can be clean to very good overall condition; plus a Stanley #3 smooth plane with fine rosewood tote, knob missing piece at base and has been reformed, 90%+ japanning, VG. Photo

59. Stanley OH5 Two-Tone jack plane with maroon and yellow paint, very good overall condition. Photo

60. Two levels: A millwright’s type marked “THE CORNER PLUMB” by the Peerless Level & Tool Co. Sterling, ILL. Very good overall; & a 26-inch Henry Disston & Sons plumb & level, VG. Photo

61. EMPIRE #80E level sights IOB, fine. Photo 1 & Photo 2

62. Lot of five Yankee type screwdrivers: Great Neck #277A; two Millers Falls #61; Yankee #30; and unknown with blue plastic handle. Photo

63. Lot of three screwdrivers: Scarce Millers Falls #639, Fine; Goodell Pratt rosewood tool handle with handle full of bits, cap is broken; Goodell Bros. spiral screwdriver; and an unmarked with wood handle. Photo

64. Three outside spring calipers; one inside spring caliper, Nice L.S. Starrett dividers; and a single Stanley #4 trammel point with pencil holder. Photo

65. Three outside calipers, largest looks homemade, the “lady leg” pair has been painted with copper paint; and the smallest pair is factory made. Photo

66. Lot of 17+ assorted tape measures, most in very good usable condition Photo

67. Lot two Lufkin rules: #036 caliper rule & #651, 24-inch 4-fold, both in very good condition. Photo

68. Four zig zag rules: Lufkin “Two Way” No. 966; Unknown; Stanley “Big 6” and a X46 by Lufkin; all in very good overall condition. Photo

69. Set seven plow plane irons: the four largest are by A. HILDICK SHEFFIELD; the others are Sorby; Greaves & MOT FRAM, all are VG.

70. Set of six plow plane blades: #1, 2, 5 & 7 are by MOULSON BROS; the other two are W. BUTCHER, VG.

71. Matched set of 7 WARD plow plane blades, VG. Photo

72. Ohio Tool Co. #129 screw-arm sash plane, very good overall. Photo 1 & Photo 2

73. Auburn Tool Co. moving fillester plane with screw-adjusted depth stop. Photo 1 & Photo 2

74. Fine homemade wooden spill plane with a Sorby blade. Photo

75. Stanley #98 right-handed side rabbet plane, early pre-depth stop model, fine overall. Photo 1 & Photo 2

76. Stanley #99 left-handled side rabbet plane, with depth stop, fine overall. Photo 1 & Photo 2

77. Stanley #140 skew-bladed block plane, little surface rust, will clean to fine overall. Photo 1 & Photo 2

78. Stanley #95 edge-trimming block plane, complete and fine. Photo 1 & Photo 2

79. Metallic Plane Co. 5 ½-inch iron block plane with original cutter, very good overall. Photo 1 & Photo 2

80. Stanley #278 rabbet & fillester plane, complete with depth stop and fence, very good overall. Photo 1 & Photo 2

81. Unknown make Continental scrw-arm plow with wide fence, missing blade and wedge, otherwise fine; plus a toothing plane in fine overall condition. Photo 1 & Photo 2

82. Three unhandled wooden plow planes, all have screw adjusting stops, one is strictly a parts plane, the other two will make good users. Photo

83. Lot of three wooden dado planes, two have screw adjusting stops, all three very good; plus one parts plane.

84. Lot of six wooden molding planes inc. Auburn #12 round; A.C. Bartlett’s hollow; Ohio Tool Co. #75, ½-inch grooving plow, etc.

85. Three handled wooden plow planes: Ohio Tool Co. #104 screw-arm plane plane, some thread damage and handle spur sheared off, otherwise good; Unknown beech model in very good overall condition; & A.C. Bartlett’s #120, very good.

86. Ohio Tool Co. 2-inch handled jack rabbet plane. Photo

87. Pair wooden planes: Unknown 1 3/8-inch handled jack rabbet plane with offset handle, very good; and homemade 1-inch round. Photo

88. Lot of six iron block planes inc. American Boy; PEXTO & Stanley; two only good for parts. Photo

89. Traditional shaped wooden spill plane, for making wooden spills that were used to transfer fire from one point to another. This one has an old chisel for a blade, and the wedge may be a newer replacement, VG.

90. NICHOLLS OTTUMWA, IA Dec. 6, 1913 patent take-down rafter square, fine overall condition.

91. Stanley #7 jointer plane with 95%+ original japanning, fine BB logo cutter, nice rosewood tote and knob, hang hole in rear of bed, fine overall; Stanley #4 ½ heavy smoother WWII model, bed repainted, good hardwood tote and knob, BB logo cutter, needs front screw to secure tote, very good overall. Photo

92. Stanley #46 skew bladed plow plane, this one has 90%+ nickel plating, fine rosewood handle and knob, and cutter box with 6 cutters, there are 7 total including the slitter, all inside a fine owner made wooden box with box joints, the plane is fine, the cutters will need cleaning. Photo 1 & Photo 2

93. Rosewood handled sliding "T" bevel with 14-in. blade Photo

94. Stanley No. 225 sliding "T" bevel Photo

95. Lot of five misc. "T" bevels and squares Photo

96. Lot of ten Stanley folding rules, including No. 62, No. 70, No. 36 1/2, No. 54, No. 68, and No. 61 Photo

97. E.C. Simmons "Redline" 24-in. folding rule

98. Lufkin No. 873L folding rule, level and bevel

99. Choice of four ivory folding rulers Photo

100. Scarce O.R. Chaplin's No. 5, 9-in. smooth plane w/nickel plated handle and knob

101. RARE Bailey Tool Comp. "Defiance" Model B block plane (throat chipped) See PTAMPIA Vol. I, pg. 67 Photo 1 & Photo 2

102. Stanley No. 97 chisel plane Photo

103. Stanley No. 113 compass plane Photo

104. Stanley No. 2 smooth plane Photo

105. Stanley Victor No. 20 compass plane Photo

106. Scarce Stanley No. 46 Type I combination plane with seven original cutters and wrap-around depth stop

107. Stanley No. 45 Type I complete with set of eighteen original cutters Photo

108. Stanley No. 45 Type 20 NIB Photo

109. Stanley No. 45 Type 4 with 19 original cutters Photo

110. Stanley No. 45 Type 3 with 15 original cutters Photo

111. Three wooden spokeshaves, one with screw-adjust cutter Photo

112. Brass coachmaker's router Photo

113. Windsor beader Photo

114. Stanley No. 85 boxwood razor shave Photo

115. Stanley No. 151 spokeshave Photo

116. Stanley No. 67 universal shave with both bottoms Photo

117. Stanley No. 62 reversible spokeshave Photo

118. Stanley No. 65 chamfer spokeshave Photo

119. USMC 17" shoemaker's iron block plane Photo

120. Stanley No. 289 skew-bladed rabbet plane with proper fence and depth stop Photo

121. Stanley No. 39 7/8 dado and 78 rabbet plane Photo

122. Stanley No. 48 Type I T&G plane Photo

123. Stanley No. 171 door router plane with original fence Photo

124. Two quick-adjust machinist vises (Choice) Photo

125. Lot of ten Stanley and other clapboard siding gages Photo

126. G. Calhoon Victor, Mo. "Feb 5, 07 patent" bevel and square Photo

127. Lot of six small claw hammers (choice two times) Photo

128. Goat head claw hammer Mitteldorfer Strauss Pat. Photo

129. Stanley No. 4 trammel points Photo

130. Stanley No. 4 Type I trammel points Photo

131. Pair of Stanley No. 2 Type I trammel points complete set Photo

132. L.S. Starrett No. 50A trammel points with patented pencil holder Photo

133. Pair of large unknown trammel points with patented pencil holder Photo

134. Two sets of homemade trammel points Photo

135. SCARCE Stanley No. 99 pair of rule trammels, complete set Photo

136. Stanley No. 4 trammel points Photo

137. Pair of Scioto Works wooden bench planes: jack and fore Photo

138. Empire Tool Co. wooden jack plane with iron jointer fence Photo

139. Pair of wooden planes razee style: jack and handled jack rabbet Photo

140. Pair of plated wooden braces: one has brass pad Photo

141. William Marples "Ultimatum" brace, ebony and brass (needs chuck repair) Photo

142. NICE Eskiltuna brace with a fitted-boxed se of Swedish spoon bits, center bits and countersinks Photo

143. Stanley No. 132 transitional jointer plane Photo

144. Matched pair: Stanley No. 127 and No. 129 "Liberty Bell" planes Photo

145. Stanley No. 122 "Liberty Bell" smooth plane Photo

146. Stanley No. 22 and No. 35 transitional smooth planes Photo

147. Stanley No. 35 and No. 36 transitional smooth planes Photo

148. Buck 5-inch dovetailed infill plane Photo 1 & Photo 2

149. Brass 3 ½-in. block plane, graduated sides for dental molds Photo

150. Stranahand's Blind-nail plane (see R. Smith’s PTAMPIA Vol. II, pg. 118) Photo

151. Vaughn & Bushnell No. 903 smooth plane

152. Lot of two Gage No. 4 smooth planes Photo

153. Stanley No 12 ½ cabinet scraper Photo

154. Boxed beading attachment for Stanley No. 72 plane Photo

155. Stanley No. 72 chamfer plane Photo

156. Keen Kutter No. 55 jointer gage Photo

157. Millers Falls No. 88 jointer gage Photo

158. Stanley No. 3C and Simmons 8-in. smooth planes Photo

159. Chaplin's Improved No. 205 smooth plane Photo

160. Lot of two miniature drawknives Photo

161. Lot of two miniature drawknives Photo

162. Star cam-locking marking and mortise gage Photo

163. Star twist-locking marking gage Photo

164. Pair of Stanley marking gages: No. 62 and No. 64 1/2

165. Three marking gages: one Stanley No. 72 and 2 unmarked

166. Rope maker, including wrench and twister Photo

167. Nicholls Manufacturing Co. No. 107 steel marking gage Photo

168. Unknown patented double-beam marking and mortise gage Photo

169. Disston? 9-in. rosewood & brass try square with built-in level and scribe Photo

170. Payson's No. 001 tobbogan plane Photo

171. Stanley No. 95 edge-trimming block plane Photo

172. Pair: Stanley No. 98 & 99 side rabbet planes Photo

173. Stanley No. 140 skew-bladed rabbeting block plane Photo

174. Stanley No. 131 double-ended block plane Photo

175. Stanley No. 90 cabinetmaker's block plane Photo

176. Stanley No. 118 unbreakable block plane Photo

177. Ohio Tool Co. No. 060 1/2 Mark's Patent low-angle block plane Photo

178. Stanley No. 130 double-ended block plane Photo

179. Rich-Con No. 130 double-ended block plane Photo

180. Unusual Stanley 9 1/2A English block plane Photo

181. Union Excelsior-style block plane with knuckle cap Photo

182. Stanley No. 60 low-angle block plane Photo

183. Sargent No. 1317 tail-handled block plane Photo

184. Stanley No. 103 Type I block plane Photo

185. Stanley No. 140 Type I skew-bladed block plane Photo

186. Ohio Tool Company No. 103 block plane Photo

187. Pair of block planes, including early Stanley No. 103 Photo

188. Lot of six wooden dividers Photo

189. Miniature hand-forged iron traveler Photo

190. Hand-forged iron traveler Photo

191. Lot of three brass travelers (choice one time) Photo

192. Miniature brass traveler Photo

193. Keen Kutter No. 618-18-in. cast iron level Photo

194. Davis Level & Tool Company No. 3, 18-in inclinometer level (cracked top rail) Photo

195. Winchester W3-28 in. wooden level (original decal) Photo

196. Davis & Cook 28-in. plumb and level Photo

197. Lambert, Milliken & Stackpole 30-in. level Photo

198. Stanley 28-in. brass bound mahogany level Photo

199. A. Howland & Co. screw-arm, handled plow plane w/6 cutters Photo

200. T.J. M'Master & Co. wedge-arm plow plane w/4 cutters Photo

201. Wooden toothing plane Photo

202. German horned toothing plane Photo

203. Two wood planes: Ohio Tool Co. handled smooth plane and homemade? jack plane Photo

204. English wooden chamfer plane Photo

205. Stanley No. 41 Miller's Patent plow plane with fillister bed, wraparound fence and cutters Photo

206. Stanley No. 141 Miller's Patent plow plane with fillister bed, eleven cutters and nosing piece Photo

207. Stanley No. 43 Miller's Patent plow plane with five original blades Photo

208. Stanley No. 55 combination plane in original chestnut box with 51 original cutters Photo

209. Davis Level & Tool Co. No. 1, 6-in. inclinometer level Photo

210. M.W. Robinson Davis Patent 6-in. cast iron level Photo

211. Pair of 6-in. cast iron levels Photo

212. Pair of 3-in. Stanley No. 40 pocket levels Photo

213. Stanley No. 34, 8-in. level with brass sights Photo

214. Pair of Stanley pocket levels: No. 40, 3-in. and unknown Photo

215. Pair of Stanley No. 2 metallic level sights Photo

216. Stanley No. 44 bit and square level Photo

217. Pair of Stanley No. 1 wooden level sights Photo

218. Stanley No. 7 metallic level pitch adjuster Photo

219. Lot of 3 boxes of Stanley replacement vials for levels (choice one time) Photo

220. Pair of 6-in. cast iron levels: Starrett and Stanley No. 36 Photo

221. Pair of Stanley No. 138 level sights NIB Photo

222. Pair of levels: Starrett No. 134 and Stanley No. 38 ½, 4-in. Photo

223. Eagle take-down square Photo

224. Nicholls Mfg. Co. take-down square Photo

225. Keen Kutter KTR100 take down square Photo

226. Lot of 2 wooden squares, one patented Sept. 20, 1851 Photo

227. Lufkin No. 6132 tailor's square Photo

228. Unknown wooden tailor's square “Pat. Applied For” Photo

229. Stanley No. 500C rafter's square Photo

230. Stanley No. 39-1-in. dado plane Photo

231. Stanley No. 39-7/8 in. dado plane Photo

232. Stanley No. 39- 5/8 in. dado plane Photo

233. Stanley No. 10-1/2 rabbet plane w/cracked side Photo

234. New Stanley No. 10-1/2 rabbet plane (English) Photo

235. Stanley No. 13 Type 2 compass plane Photo

236. Stanley No. 112 scraper Photo

237. Stanley No. 49 Type I T&G plane Photo

238. Stanley No. 48 Type I T&G plane Photo

239. Stanley No. 10 carriage maker rabbet plane, orig. decal on tote Photo

240. Bulldog nail puller Photo

241. Greenlee No. 515 nail puller Photo

242. Crescent Tool Co. Giant nail puller Photo

243. B.S.D. Co. adjustable hollow auger with depth stop Photo:

244. McCreary 1858 patented hollow auger Photo

245. Adjustable Stearns dowel pointer Photo

246. Unusual Stearns? patented hollow auger Photo

247. A.A. Woods & Son adjustable hollow auger Photo

248. Pair of dowel pointers Photo

249. Pair of pipe jaws for a monkey wrench Photo

250. Patented nut wrench for use in brace Photo

251. Two hollow augers complete with depth stops Photo

252. Unknown "Patent Applied For” 12-in. level Photo

253. Stanley No. 36, 24-in. level with a Stanley No. 38 adj. leveling stand Photo

254. Winchester W3618, 18 in. cast iron level FINE Photo

255. Davis No. 2 Inclinometer level – 12 in. (needs screws & pointer) Photo 1 & Photo 2

256. Davis Pat. M.W. Robinson No. 8, 18 in. cast iron level Photo

257. Pair of cast iron levels: Stanley No. 36 and Miller's Falls Photo 1 & Photo 2

258. Pair of cast iron levels: Stanley No. 36 and L.S.S. Co. (Starrett) 18-in. Photo 1 & Photo 2

259. Box lot: four Stanley bench planes inc. H1203 & H1204 Photo

260. Three iron bench planes: Stanley 4-square jack, Sargent 409, and Victor 1104 Photo

261. Keen Kutter wooden axe box Photo

262. Keen Kutter pocket knife box Photo

263. Goodell-Pratt Shepardson’s Pat. No. 333 iron plane gage IOB Photo

264. Stanley No. 45 Type 11 combination plane IOB FINE Photo

265. Stanley No. 5 nosing attachment for combination plane IOB Photo

266. Stanley No. 78 rabbet plane IOB Photo

267. Stanley No. 59 dowel jig IOB Photo

268. Defiance No. 1204 iron smooth plane IOB Photo

269. Stanley No. 67 universal spokeshave IOB Photo

270. Stanley No. 42 saw set IOB Photo

271. Stanley No. 75 rabbet plane IOB Photo

272. Stanley No. 55 combination plane in chestnut box complete Photo

273. Stanley No. 71 router IOB Photo

274. Stanley No. 3 smooth plane IOB Photo

275. Stanley No. 66 boxwood folding rule Photo

276. Stanley No. 68 boxwood 4-square folding rule Photo

277. Keen Kutter K620 boxwood folding rule FINE Photo

278. Stanley No. 62 1/2 boxwood folding rule Photo

279. Winchester W68 boxwood folding rule FINE Photo

280. Rabone No. 1190 folding rule level and protractor like new Photo

281. Lot of three Stanley zig-zag rules Photo

282. H. Chapin No. 15 1/2 boxwood folding rule Photo

283. Lot of two 24-in. boxwood folding rules with arched joints Photo

284. Stanley No. 69, 12 in. boxwood folding rule Photo

285. Stanley No. 66 1/2A boxwood folding rule SW Photo

286. Interlox No. 106 sliding rule in original imitation alligator pouch Photo

287. Pair of Interlox sliding rules Nos. 104 & 106 Photo

288. Two Stanley zig-zag rules including No. 206 and No. 424 Photo

289. Lot of four miscellaneous zig-zag rules Photo

290. Keen Kutter K620 and Stanley 66 1/2 boxwood folding rules Photo

291. Union No. 60 and Stanley No. 65 iron spokeshaves Photo

292. Lot of four miscellaneous iron spokeshaves Photo

293. Wooden coachmaker's router and homemade wooden shave Photo

294. Pair of iron leather shaves Photo

295. Stearns flexible bottom shave + Stanley No. 66 beader Photo

296. Stanley No. 83 and No. 81 scrapers Photo

297. Primitive wooden handled scraper and coachmakers? router Photo

298. Lot of three miscellaneous spokeshaves including Stearns and Stanley No. 51 Photo

299. Handled scorp and wooden scraper Photo

300. Stanley No. 67 universal shave with fence and both bottoms + No. 66 beader Photo

301. Box lot miscellaneous hammers including KK & Simmons Photo

302. Sandusky matched set of six plow plane blades Photo

303. BEDROCK No. 608 FT jointer plane Photo

304. Stanley No. 8C jointer plane Photo

305. Stanley No. 605 1/2C jointer plane Photo

306. Union No. X8C jointer plane Photo: Photo

307. Metallic Plane Company 20-in. iron jointer plane Photo

308. Stanley No. 386 jointer fence Photo

309. Diamond Edge DE7 jointer plane Photo

310. Chaplin's Improved Pat. 18-in. fore plane Photo

311. Stanley No. 20 compass plane Photo 1 & Photo 2

312. Stanley No. 60 1/2 & No. 61 block planes Photo

313. Sargent No. 307 block plane with tail handle Photo

314. Chaplin's Pat. wide body block plane Photo

315. Stanley No. 18 & 140 Type I block planes Photo

316. Stanley No. 103 Type I block plane Photo

317. Stanley No. 131 double-ended block plane Photo

318. Stanley No. 65 block plane Photo

319. Stanley No. 100 1/2 round bottom block plane Photo

320. Stanley No. 9 1/4 & No. 102 block planes Photo

321. Pair of iron block planes, incl. HSB & Stanley 4-Square Photo

322. Stanley No. 79 side rabbet Photo

323. FINE Stanley No. 1 smooth plane Photo

324. FINE Stanley No. 2C smooth plane Photo

325. Stanley No. 444 dovetail plane, complete, in original wooden box FINE Photo

326. Lot of eleven miscellaneous saw sets, incl. "The Buller" & Stillman's Photo

327. Two 10-in. wooden levels:  Sargent and Stanley No. 102 Photo

328. Two Stanley No. 102 wooden levels: 14-in. & 16-in. Photo

329. Two wooden levels: Stanley 18-in. & Oak Leaf 18-in. Photo

330. C.S. Co. 28-in. wooden level with boxwood inclinometer insert in side Photo

331. Davis & Cook 26-in. wooden level & plumb + unknown 30-in. level Photo

332. Boxed set of Irwin drill bits & W. Thompson brass head brace Photo

333. Spofford's Patent brace & set of Irwin bits (rusty) Photo

334. P. Lowentraut brace/wrench Photo

335. Set of three, early steel and brass dividers VG Photo

336. Polygraph Co. 1885 Pat. No. 3 brass polygraph Photo

337. Nice blacksmith made double calipers Photo

338. Fancy embossed outside calipers Photo

339. Two pair early hand forged dividers Photo

340. Choice lady leg calipers [one in orignal paint] (Choice three times) Photo

341. Pair primitive rack wing calipers and pair of primitive dividers Photo

342. Primitive brass, Wimble-style brace Photo

343. Three inch slick Photo

344. Primitive smith-made iron brace & box of primitive bits (choice) Photo

345. Stanley No. 77 dowel & rod-turning machine (repainted) w/ 3/8 & 5/8 cutters & original instruction book Photo

346. Quickcet & Luther bench mounted vises (Choice) Photo

347. Unusual blacksmith-made triple calipers Photo

348. Unknown mfg. 3 ¾-inch slick Photo

349. O.V.B. 3 3/8 in. slick w/ handle Photo

350. Blacksmith made double calipers Photo

351. J. W. Murphy layout square Alva, OK Photo

352. Saturn layout square Photo

353. Starrett double calipers Photo

354. Blacksmith made double rack wing calipers Photo

355. Blackhawk skeleton implement wrench Photo 1 & Photo 2

356. Lot of three implement wrenches inc. Deere, Ideal & Harper Photo

357. Diamalloy 6 to 8 in. double ended crescent wrench Photos

358. Pair of quick adjusting nut wrenches HandE & Hellix Photo

359. Three steel implement wrenches inc. D & M and P & O Photo 1 & Photo 2

360. Deere & Co. 8-in. wooden handled monkey wrench Photo

361. Perfect Handle & Grant Tool Co. 6 in. monkey wrenches Photo

362. Four screw adjusting nut wrenches inc. two twist handles Photo

363. Diamond 4 to 6 in. double ended crescent wrench Photo

364. May's ratcheting cotter pin puller Photo

365. Quick adjust nut wrench Duluth, Minn. Photo

366. Universal Wrench Co. 8 in. adjustable end wrench Photo

367. Helix 8 in. quick-adjust end wrench El Dorado, Ks. Photo

368. Four pair unusual patented pliers Photo

369. Three wrenches inc. double-ended crescent Photo

370. Lot of seven misc. wrenches

371. RARE G. Waller Pat. Inclinometer level Laverne, Oklahoma Photo 1 & Photo 2

372. Stanley No. 96, 26-in. rosewood level Photo

373. Diamond Edge (ACME) steel level + CS & Co. No. 290 level Photo

374. Stanley No. 100 and No. 400 picture frame miter and vise complete with original clamp and rule Photo

375. Large dovetailed cabinetmaker's tool chest w/four sliding tills, sawbox, asst. misc. tools, top trays have inlaid lids w/ working lock and key Photo 1,  Photo 2 & Photo 3

375A. Nice Maple work bench  52" X 36" X 32" with two drawers, center tray, and quick adjust vise, from a school shop

375B. Nice 48" X 24" X 24" tall woodworking work bench, with shelf and vise, from an elementary school Photo

376. Educational model of home construction illustrating different types of jointery Photo

377. Pair of No. 35 transitional planes Photo

378. Early Stanley 15 1/2 tail handled block plane Photo 1 & Photo 2

379. Patent applied for green mortise plane (no blade) Photo

380. Stanley No. 85 tilting handle scraper plane w/ marked blade Photo

381. Stanley No. 96 Type I blind nailer plane with Stanley chisel Photo

382. Stanley No. 112 scraper plane w/ 28 TPI blade Photo

383. Stanley No. 20 nickel-plated compass plane Photo

384. Stanley 5 1/4 & Stanley 4-square jack planes Photo

385. Union No. X5 “vertical post” jack plane Photo

386. Stanley No. 2 smooth plane VG Photo

387. Lot of three wooden horn planes Photo

388. Continental plow plane Photo

389. Wooden spill plane Photo

390. Miniature wooden router and two nice miniature skew bladed block planes Photo

391. Box of nine misc. wooden planes Photo

392. Primitive wooden spoke or dowel pointer Photo

393. Lot of four wooden clamps Photo

394. Lot of four early turnscrews Photo

395. Three early screwdrivers and one pad saw Photo

396. George Bishop reversible back saw from right here in beautiful Lawrence, Indiana Photo

397. Box lot: unusual belt sander, folding miter box, hand forged nail puller Photo

398. Brass plumb bob with internal reel NICE Photo

399. Stanley No. 2 brass plumb bob with reel + a Gem manufacturing line reel Photo

400. Lot of six wooden plumb bobs and one wooden reel Photo

400A. NICE “Happy Carpenter” countertop advertising “Stanley Combination Square -  The Multi-purpose Tool” Photo

400B. NICE Stanley S-268-L, 4-Square countertop advertising piece with dog & ruler Photo

401. Two nickel plated plumb bobs including O.V.B. Photo

402. Lot of four iron plumb bobs

403. Pair of General plumb bobs: 8 oz. and 16 oz. IOB Photo

404. Suverkrup Inst. 12-oz. brass plumb bob with built-in reel Photo

405. Brass plumb bob with internal reel NICE Photo 1 & Photo 2

406. K&E 14 oz. brass plumb bob IOB Photo

407. Lot of eight misc. plumb bobs, including two brass

408. Lot of six misc. plumb bobs, including a brass James A. Gaffney

409. Pair of Scotch braces with spring-loaded chucks Photo

410. Primitive iron brace with Wimble-style chuck and adjustable washer cutter Photo

411. Stanley Wimble brace Photo

412. "Yankee" Bell System brace Photo

413. Early cage-head bow drill with brass spool and bow Photo

414. Early wooden chairmaker's brace Photo

415. Small pump drill with brass fly wheel Photo

416. Primitive wooden Mennonite Immigrant button-hole pump drill Photo

417. Scandinavian-style pad brace with one pad Photo

418. Early cagehead iron brace with one center bit Photo

419. Taylor Patent Scotch-style brace Photo

420. Pump drill with steel flywheel Photo

421. Early wooden pad brace with three pads Photo

422. Wooden pad brace Photo

423. Stanley No. 78 rabbet plane IOB

424. Stanley No. 113 Type I compass plane Photo

425. Pair of Stanley block planes: No. 220 and No. 140 Photo

426. Pair of Stanley block planes: No. 220 and No. 56 Photo

427. Stanley No. 10 1/4 tilting-handled rabbet plane Photo

428. Stanley No. 71 Type 2 router Photo

429. Sargent No. 206 Type 2 block plane Photo

430. Stanley No. 98 side rabbet plane Photo

431. Pair of Stanley bench planes: No. 5C and No. 4 Photo

432. Stanley No. 146-3/8" T&G plane Photo

433. Stanley No. 72 chamfer plane Photo

434. Brass low-angle block plane with Metallic Plane Co. blade Photo

435. Stanley No. 248 weatherstripping plow plane Photo

436. Two miniature block planes: Sargent No. 104 and Stanley No. H101P Photo

437. Two iron block planes: Ohio No. 0103 and Union No. 103 Photo

438. Stanley  No. 75 rabbet plane and Stanley No. 101 block plane Photo

439. American Tool and Foundry 5-in. block plane and Defiance stamped-steel block plane Photo

440. Stanley No. 60 low-angle block plane Photo

441. Two iron block planes: Stanley No. 220 and Union No. 2 Photo

442. Stanley No. 100 and a Millers Falls tail-handled block plane Photo

443. Stanley No. 39  1/4-in. dado plane Photo

444. Stanley No. 39  ½-in.  dado plane Photo

445. Keen Kutter K130 and Stanley No. 120 iron block planes Photo

446. Pair of early Stanley block planes Photo

447. Stanley No. 135 "Liberty Bell" smooth plane Photo

448. Pair of Stanley No. 101 miniature block planes Photo

449. Four mini block planes Photo

450. Box lot of wooden panel gages and clapboard gage Photo

451. Box of four wooden marking gages, four siding gages, combo siding & marking gage Photo

452. Unmarked brass plated wooden brace with boxwood pad Photo

453. "Pilkington & Co. Late with Bloomer & Philipps" plated brace Photo

454. Miniature ebony panel gage & rosewood marking & mortise gage Photo

455. FINE Stanley No. 92 rosewood and brass marking & mortise gage Photo

456. Three wooden marking gages Photo

457. Pair of rosewood marking and mortise gages Photo

458. Millers Falls No. 714 "Buck Rogers" jack plane Photo

459. Millers Falls No. 11 junior jack plane Photo

460. Millers Falls No. 714 "Buck Rogers" jack plane plus hand drill Photo

461. Pair of Millers Falls No. 300 "Buck Rogers" hacksaws and one "Buck Rogers" hand drill Photo

462. Winchester No. 3902 hacksaw Photo

463. Two primitive wooden travelers Photo

464. The Green River wagon tire wheel traveler Photo

465. Graphic hand-forged iron traveler Photo

466. Hand-forged five-spoke iron traveler Photo

467. Hand-forged iron traveler with star design Photo

468. Unknown manufactured router Photo

469. Pair of hand-made brass travelers Photo

470. Nice brass traveler plus hand-forged iron traveler Photo

471. Stanley No. 96 30" rosewood plumb and level Photo

472. Gibson, Lahoma, Okla. Patent 28-in. inclinometer level Photo 1 & Photo 2

473. Edward Helb inclinometer level with steel trim Photo

474. C.E. Jennings 18-in. cast iron filligree level Photo

475. Davis Level & Tool Co. 18-in. cast iron plumb and level Photo

476. Keen Kutter K624  24-in. cast iron plumb and level Photo

477. Leonard Bailey's "Victor" No. 14 combination plane Photo

478. Stanley No. 113 Type 8A compass plane Photo

479. Stanley No. 200 sharpening gage Photo

480. Stanley No. 45 Type I combination plane with full set of cutters Photo

481. Stanley No. 190W weather-stripping rabbet plane (replaced fence) Photo

482. Stanley No. 46 Type I combination plane with seven original blades & wrap-around depth stop Photo

483. Stanley No. 50 light duty combination plane complete with sixteen original blades, chip deflector and depth stops Photo

484. Stanley No. 50 light duty combination plane with one plow cutter and beading stop Photo

485. Stanley No. 45 Type I combo plane w/ original box of cutters (cutters not shown in photo) Photo

486. Box of Stanley light duty combination plane parts Photo

487. Stanley No. 99 side rabbet plane Photo

488. Stanley No. 98 side rabbet plane Photo

489. Stanley No. 278 rabbet and fillester plane Photo

490. Stanley No. 10 carriagemaker's rabbet plane Photo

491. Winchester No. 3076 cabinet scraper Photo

492. Stanley No. 12 1/2 cabinet scraper Photo

493. Stanley No. 30 angle divider Photo: DSCN4775.jpg

494. Stanley No. 122 and H122 ½ squares Photo

495. EAGLE sliding T-bevel with 6-in. blade Photo

496. Stanley No. 25 and No. 18 bevels Photo

497. Stanley No. 24 combination try square and bevel Photo

498. Stanley No. 24 combination try square and bevel Photo

499. Stanley 4-Square and Stanley Defiance No. 1221 squares Photo

500. Lot of three wood-handled bevels Photo

501. Lot of three tool handles Photo

502. Lot of two sewings awls inc. J.S. Fray & Co Photo

503. VG Millers Falls rosewood tool handle Photo

504. Lot of three wooden marking gages Photo

505. Lot of three marking gages, one rosewood Photo

506. One hand-made wooden marking gage with ivory or bone screw Photo

507. F.W. Ritchie combo bevel, square & level with patent papers Photo

508. M. Jincks 1867 Patent countersink bit with attached spur and raker Photo

509. Hill’s 1885 Patent cam-locking expansive bit Photo

510. Rich-Con RC6R ratchet brace with 6" throw Photo

511. John S. Fray & Company No. 112 Spofford's Patent brace with large spoke-pointer Photo

512. P. S. & W. No. 59 1/2 ratcheting brace with 6-in. sweep Photo

513. Goodell-Pratt corner brace Photo

514. McClellan Patent corner brace Photo

515. Bow drill with no bow and a Goodell-Pratt archimedian drill (needs work) Photo

516. Stanley No. 203 block plane Photo

517. Stanley Nos. 180, 181 and 182 rabbet planes Photo

518. Stanley 10 1/2 carriagemaker's rabbet plane Photo

519. Stanley No. 113 Type 2 compass plane Photo

520. Millers Falls cigar shave Photo

521. Dovetailed rosewood stuffed 6-in. steel smooth plane Photo

522.  I. Richardson rosewood stuffed smooth plane Photo

523. Stanley No. 10 carriagemaker's rabbet plane Photo

524. Stanley No. 50 light-duty comination plane, wood handle, full box of cutters Photo

525. Early Stanley No. 79 side rabbet plane Photo

526. Sargent-made craftsman rabbet and fillester plane Photo

527. Four bench-top drill presses (choice twice) Photo

528. Stanley No. 46 combination plane in owner-made box with full set of eleven cutters and owner's manual Photo

529. Stanley No. 248A with seven cutters Photo

530. Stanley No. 378 weather-stripping rabbet plane Photo

531. Stanley No. 10 1/2 WWII model carriage makers rabbet plane Photo

532. Pair of 9-in. iron levels, including Stanley No. 37 & Standard Tool Co. Photo

533. Stanley No. 107 S.W. 12-in. level Photo

534. Goodell-Pratt No. 4512, 12-in. brass-bound mahogany level Photo

535. L.S.S. Co. 15-in. and Stanley No. 36, 18-in. cast iron levels Photo

536. Stratton Bros. No. 11 ½, 24-in. brass-bound mahogany level Photo

537. Starrett No. 134 corner level and Starrett 6-in. shaft level in original box Photo

538. Buck Bros. miniature drawknife plus miniature coachmaker's rounder Photo

539. Stanley Nos. 90 and 98 marking gages Photo

540. Leavitt double beam marking gage plus Stanley No. 90 marking gage Photo

541. Stanley No. 1 "Odd Jobs" (for parts) Photo

542. Boxwood and brass rope caliper Photo

543. Stanley? No. 69, 12-in. folding ruler VG Photo

544. FINE C-S Company No. 65, 12-in. folding rule Photo

545. Upson Nut Co.  No. 69, 12-in. folding ruler (needs hinge repair) and Unknown No. 69, 12-in. folding rule Photo

546. Stanley No. 7 "Blindman's"  24-in. folding rule Photo

547. Pearson's Nailer, better than average condition Photo

548. Box lot: MARX toy tools: saw, hammer, plane, square, miter box, etc. Photo

549. Wooden “hag’s tooth” router Photo

550. Lot of three advertising pieces: two Stanley carpenter pencils, one Alamo Iron works zig zag rule Photo

551. Lot of three steel folding scales, including two Lufkin 12-in. scales Photo

552. Lot of Stanley No. 66 ¼, 36-in. folding rule and Dietzgen 30/60/90 degree  triangle Photo

553. Lufkin Rule Co. Cleveland, Ohio 36-in. folding steel scale Photo

553A. Brooklyn Patent Double claw hammer Photo

553B. Claw hammer with strap handle Photo

553C Set of 3 tools for slate roof work: nail ripper & hammer Photo

554. Box lot with five hand-forged bench dogs and two advertising pencils Photo

555. Stanley No. 59 dowel jig IOB with instructions Photo

556. Stanley Nos. 70 and 82 scrapers Photo

557. Phoenix and unknown miniature vises Photo

558. Two small claw hammers including Stanley No. 12, 5 oz. and Townley 7 oz. Photo

559. Unusual patented triple-claw hammer Photo

560. Stanley No. 81 cabinet scraper Photo

561. L.S. Starrett No. 16 combination set with double protractor Photo

562. Lufkin No. 8205  24-in. wooden shrink rule and Stanley No 34 1/4 VR 12" rule Photo

563. Lufkin Co. No. 7172  6-in. sliding rule Photo

564. Stanley 24" boxwood ruler & sliding 36-in. yard stick Photo

565. Stanley 102 1/2 claw hammer & HH2 leather hammer holster Photo

566. Set of small brass trammel points Photo

567. Nice Keen Kutter rosewood tool handle w/10 tools Photo

568. Keen Kutter K1945 fencing pliers & 50-food steel tape measure in leather case Photo

569. Stanley No. 240 4-foot sliding ruler and unknown wooden wantage rod.

570. Keen Kutter hack saw and Enders 6-in. drawknife Photo

571. Stanley No. 25 sliding bevel & Stanley 3-in. rosewood handled square. Photo

572. Straight-Line-Products No. 66 adj. try square Photo

573. Three Stanley No. 4 trammel points and set of small brass trammels Photo

574. Four Nicholson Mill Bastrard files IOB Photo

575. Stratton "THE DANDY" 24-in. plumb & level, and homemade plumb bob level Photo

576. Lot of five misc. wrenches incl. "HANDY PAT APPL'D FOR" multi plier tool Photo

577. Estwing hatchet with sheeth and Lufkin No. 1085 2-foot brass blacksmith's rule Photo

578. Box lot: wooden hoop driver, cloth tape, 3-inch square, & Stanley No. 93 gage Photo

579. Brass display sign advertising Nicholson Files Photo

580. Stanley tool chest No. 904 complete with tools Photo

581. Boys' Dandy tool chest No. 52 complete with tools Photo

582. Set of four planemakers' floats and a filemakers' chisel Photo

583. Lufkin No. 1085 2-foot brass blacksmiths's rule + Buck Bros. burnisher Photo

584. Box lot of miscellaneous drill bits incl. center bits, spoon bits, and countersinks Photo

585. GEM folding miter box and unknown steel saw guide Photo 1 & Photo 2     

586. Lot of misc. gages, incl. Starrett 111 stair gages & rare rule gage for Stanley No. 400 miter vise Photo

587. Lot of plane blades (choice 3 or 4 times) Photo

588. Japanese carved wooden charcoal box or chalk line reel, Nice! Photo

589. Choice: Winchester No. 3501 coping saw or Stanley No. 39-04 coping saw Photo

590. Wooden frame fret saw in old green paint Photo

591. Nice early bow saw Photo

592. Wooden frame fret saw and German-style steel-framed jeweler's saw Photo

593. Early hand-forged steel hack saw and early hand-made stair saw Photo

594. Pair of wooden stairmaker's saws Photo

595. Stanley No. 45 Type 11 combination in original pasteboard box COMPLETE Photo

596. Stanley No. 45 Type I combination plane in original chestnut box with blades and original screwdriver Photo

597. Stanley No. 45 Type 4 combination plane IOB with original set of cutters, cam, screwdriver, etc. Photo

598. FINE Stanley No. 45 Type 15 combination plane IOB complete & fine Photo

599. Pair of track or grading levels, one with brass Stanley name plate (choice) Photo

600. Stanley BEDROCK No. 604 1/2C RT Photo

601. Stanley No. 193A fiberboard beveling plane, includes original instruction booklet Photo

602. Stanley No. 40 scrub plane Photo

603. Stanley No. 40 1/2 with original decal on handle Photo

604. Metallic Plane Co. Palmer's Patent triple-lever jack plane with adj. throat Photo

605. Stanley No. S4 unbreakable smooth plane Photo

606. Stanley No. S5 Unbreakable jack plane Photo

607. SCARCE Jennings Patent 14-in. jack plane with rosewood wear strips dovetailed into bottom Photo

608. Steer's Patent No. 305 jack plane Photo

609. Stanley No. 1951 fiberboard beveling plane Photo

610. Stanley No. 12 cabinet scraper Photo

611. Stanley BEDROCK No. 603 FT smooth plane Photo

612. Set of rabbet planes: Stanley Nos. 190, 191 and 192 Photo

613. Stanley 5 1/4C jack plane Photo

614. Keen Kutter KK220 block plane Photo

615. Stanley No. 5 1/2C jack plane with (orange frog) Photo

616. Sargent No. 606 low-angle block plane Photo

617. Keen Kutter No. 220 style block plane Photo

618. Stanley 4-Square and Stanley Two-Tone block planes Photo

619. Stanley No. 203 block plane Photo

620. Stanley Nos. 102 and 103 block planes Photo

621. Stanley No. 220 and Stanley No. 103 Type I block plane Photo

622. Millers Falls cigar shave and Goodell-Pratt burnisher Photo

623. Unknown patented plane blade and chisel sharpening guide Photo

624. Six misc. iron block planes including  Stanley No. 75 and Keen Kutter No. 103

625. James Swan Co. drill bit box with assorted adjustable auger bits Photo

626. Stanley No. 59 doweling jig complete with reprinted instructions Photo

627. Stanley No. 78 plane IOB Photo

628. Stanley No. 138 level sights IOB Photo

629. Stanley No. 190 plane & Stanley No. 66 Type I  beader  Photo

630. Lot of 2 hammers: Cheney nail holding hammer + Stanley No. 12, 5-oz. claw hammer Photo

630A. Log marking hammer Photo

630B. Dinglestock set Photo

630C. Stanley 32-oz. framing hamer Photo

630D. Philadelphia 32-oz. framing hammer Photo

631. Stanley No. 66 hand beader with blades and 1 fence Photo

632. Felt roll of Pioneer salesman sample hickory handles, for axes, hammers, etc. Photo

633. Box lot: Screwdriver bits, wrenches, compass, etc.                                                                 Photo

634. Assorted Stanley try and miter squares Photo

635. Box lot: Diamond Edge square, pipe jaws for vise, stair gages, early forged inside/outside caliper, etc. Photo

636. Box lot: Stanley No. 203 bench clamps, chalk line, coach maker's router, box opener, Stanley try square, etc. Photo

637. Box lot: Misc. rulers, rule parts, Stanley try square, etc. Photo

638. Box lot: Saw sets, hand drill, wooden jeweler’s clamp, modified square, etc. Photo

639. Stanley 10-in. SW logo pipe wrench, Handyman No. 1500 pliers Photo

640. Stanley 10-in. SW logo pipe wrench, Handyman No. 1500 pliers Photo

641. Box lot: Stanley Type I try square, nice handle for No. 12 scraper, nail sets, skate sharpener & mini Stanley SW hinges
  Photo 1 & Photo 2

642. Choice lot: two early Bailey plane blades, Bedrock lever cap, Miller's Patent wrap-around fence Photo

643. Wooden framed veneer saw with hand forged ram's horn nut Photo

644. Choice of 8 box lots of tool books inc. MWTCA reprints Photo

645. Choice of 10 box lots of Gristmills, Chronicles, Stanley Tool Collector News, etc. Photo

646. McCormick binder wrench (both sections present) Photo

647. Box lot: Try and miter squares, small steel framing squares, marking gauges Photo

648. Box lot: Stanley 7-in. “4-Square,” square, No. 28 and No. 29 rounding tools, No. 21 square, 61 and 65 marking gauges Photo

649. Box lot: Nice wooden travisher, Keen Kutter cross peen hammer, Bicycle nipple wrench, etc. Photo

650. Two wooden boxes miscellaneous auger bits Photo

651. Wooden till full of miscellaneous saw parts and blades Photo

652. Choice box of Stanley plane blades, included are full boxes 1 or 2 for Stanley 45 combination plane with labels Photo

653. Choice: box of block plane parts or box of Miller's Patent plow plane parts Photo 1 & Photo 2

654. Box lot: plane handles & knobs Photo

655. Large flat full of carving gouges, turning tools, and mortising chisels, inc. KK 1/8-in. and Swan ¼-in. mortising Photo

656. Box of wooden screw boxes and taps Photo

657. Tray of Stanley plane blades including new-old stock No. 2 blades (choice blade 2 or 3 times) Photo

658. Handled scorp, 6 surveyor’s stakes, Stanley No. 1460 pry bar, and variable pitch exhaust whistle Photo

659. Box assorted plane parts inc. Stanley #55 and others Photo

 

The following “X” lots will be worked into the sale throughout the say.

 

X1. Farmer's Practical Encyclopedia 1882 Two volume - Leather Bound - NICE - 1301 pages total Photo
X2. Belknap Blue Grass Catalogue - 1922 - 3236 pages Photo
X3. Peck Stow & Wilcox #10 catalog - 461 pages Photo
X4. Hart Industrial Supply Co. catalog - 612 pages Photo
X5. John H. Graham & Co. - 50th anniversary catalogue - established 1870 - Hard cover - 830 pages - V.G. Photo
X6. The Faeth Co., Kansas City, Mo. #37 catalogue - 1,024 pages - 1926? Photo
X7. Two books: Shop and Foundry Practices Copyright 1901 & 1903 in London, England  & A Text Book on Shop and Foundry Practice - Brass Founding, Blacksmithing, & Forging Photo
X8 Keen Kutter 1930 soft-cover hardware catalog, 2090 pages Photo
        ______________________________________________________________________________________________________________________

 Preview Sunday afternoon/evening and Monday morning beginning at 7 AM.

 

Absentee bidding available

 

Auction managed by Mike Urness. Questions? Call 314.434.4325 or email plncrzy@aol.com